Track Loader

Posts Tagged ‘Industrial’

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Caterpillar engine Cat C175-16

Technorati Tags: air fuel ratio, C17516, CAT, caterpillar, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Deutz engine TCD 2013

Technorati Tags: 2013, air fuel ratio, Chip, Chip Track, Deutz, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Caterpillar engine Cat C1.1

Technorati Tags: air fuel ratio, C1.1, CAT, caterpillar, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Perkins engine 1204E-E44TTA IOPU

Technorati Tags: 1204EE44TTA, air fuel ratio, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, IOPU, loader, machine, performance, Perkins, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Caterpillar engine Cat 3.4 DIT

Technorati Tags: air fuel ratio, CAT, caterpillar, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Cummins engine ISX14

Technorati Tags: air fuel ratio, Chip, Chip Track, Cummins, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, ISX14, loader, machine, performance, powered, track

• Two Year Hassle Free Warrany!
• Expidited Shipping Available!
• Ships Within One Business Day!

Product Description

SCRAPER

613B 84-76

613C 93-84

615 87-81

615C 93-85

621 74-69

621B 623B 627B 86-73

621E 623E 627E 93-86

627 74-70

631C 633C 637 75-70

631D 85-73

631E 633E 651E 637E 657E 93-85

633D 637D 85-75

639D 84-79

641B 81-70

651B 657B 657B 84-70

660B 666B 78-70

TOOL CARRIERS 25SI

IT18B 92-86

IT28 86-84

IT28B 93-86

TRACK LOADER 25SI

941B 83-69

943 92-80

951C 81-71

953 92-81

955K 75-7

955L 81-71

963 93-81

973 93-82

977K 78-75

977L 82-72

983 79-69

983B 82-78

D10 86-78

D10N D11N 93-86

D3 78-72

D4D 79-69

D4E 86-80

D4H D5H 93-85

D5 D6C 84-69

D5B 85-77

D6D 97-77

D6H 95-85

D7F 74-69

D7G 93-77

D7H 93-85

D8K 82-74

D8L 92-82

D8N 93-86

D9H 82-74

D9L 86-80

D9N 93-86

WHEEL LOADERS 25SI

916 92-86

920 84-69

926E 93-87

930 85-69

936 87-83

936E 92-87

936F 96-92

950 81-69

950B 87-81

950E 91-87

950F 96-91

966C 83-68

966D 87-80

966E 90-87

966F 93-90

980 70-69

980B 84-70

980C 92-78

980F 93-91

988 76-69

988B 93-76

992 73-70

992B 79-73

992C 93-77

WHEEL SKIDDERS 25SI

508 89-87

518 93-71

528 93-75

530B 93-92

WHEEL TRACTOR DOZERS 25SI

814 81-69

814B 93-70

824B 79-70

824C 93-78

834 71-70

834B 93-75

CLARK

DOZER

280 380 80-79

280 380 78-75

380C 74-73

TRACTOR SHOVEL

125 77-73

125B 78-73

125C 80-79

275 74-71

675 72-70

85C 74-73

CONST EQUIP MISC TRUCKS

AFE-2 76-69

AFE-5 74-69

New 24 Volt 24V 25SI Alternator for Delco Industrial Applications

Technorati Tags: 25SI, Alternator, Applications, CLARK, Delco, H D, Industrial, N D, New, tool carriers, Volt, wheel loaders, wheel tractor

• Two Year Hassle Free Warrany!
• Expidited Shipping Available!
• Ships Within One Business Day!

Product Description

SCRAPER

613B 84-76

613C 93-84

615 87-81

615C 93-85

621 74-69

621B 623B 627B 86-73

621E 623E 627E 93-86

627 74-70

631C 633C 637 75-70

631D 85-73

631E 633E 651E 637E 657E 93-85

633D 637D 85-75

639D 84-79

641B 81-70

651B 657B 657B 84-70

660B 666B 78-70

TOOL CARRIERS 25SI

IT18B 92-86

IT28 86-84

IT28B 93-86

TRACK LOADER 25SI

941B 83-69

943 92-80

951C 81-71

953 92-81

955K 75-7

955L 81-71

963 93-81

973 93-82

977K 78-75

977L 82-72

983 79-69

983B 82-78

D10 86-78

D10N D11N 93-86

D3 78-72

D4D 79-69

D4E 86-80

D4H D5H 93-85

D5 D6C 84-69

D5B 85-77

D6D 97-77

D6H 95-85

D7F 74-69

D7G 93-77

D7H 93-85

D8K 82-74

D8L 92-82

D8N 93-86

D9H 82-74

D9L 86-80

D9N 93-86

WHEEL LOADERS 25SI

916 92-86

920 84-69

926E 93-87

930 85-69

936 87-83

936E 92-87

936F 96-92

950 81-69

950B 87-81

950E 91-87

950F 96-91

966C 83-68

966D 87-80

966E 90-87

966F 93-90

980 70-69

980B 84-70

980C 92-78

980F 93-91

988 76-69

988B 93-76

992 73-70

992B 79-73

992C 93-77

WHEEL SKIDDERS 25SI

508 89-87

518 93-71

528 93-75

530B 93-92

WHEEL TRACTOR DOZERS 25SI

814 81-69

814B 93-70

824B 79-70

824C 93-78

834 71-70

834B 93-75

CLARK

DOZER

280 380 80-79

280 380 78-75

380C 74-73

TRACTOR SHOVEL

125 77-73

125B 78-73

125C 80-79

275 74-71

675 72-70

85C 74-73

CONST EQUIP MISC TRUCKS

AFE-2 76-69

AFE-5 74-69

New 24 Volt 24V 25SI Alternator for Delco Industrial Applications

Technorati Tags: 25SI, Alternator, Applications, CLARK, Delco, H D, Industrial, N D, New, tool carriers, Tractor, Volt, Wheel, wheel loaders, wheel tractor

• Two Year Hassle Free Warrany!
• Expidited Shipping Available!
• Ships Within One Business Day!

Product Description

SCRAPER

613B 84-76

613C 93-84

615 87-81

615C 93-85

621 74-69

621B 623B 627B 86-73

621E 623E 627E 93-86

627 74-70

631C 633C 637 75-70

631D 85-73

631E 633E 651E 637E 657E 93-85

633D 637D 85-75

639D 84-79

641B 81-70

651B 657B 657B 84-70

660B 666B 78-70

TOOL CARRIERS 25SI

IT18B 92-86

IT28 86-84

IT28B 93-86

TRACK LOADER 25SI

941B 83-69

943 92-80

951C 81-71

953 92-81

955K 75-7

955L 81-71

963 93-81

973 93-82

977K 78-75

977L 82-72

983 79-69

983B 82-78

D10 86-78

D10N D11N 93-86

D3 78-72

D4D 79-69

D4E 86-80

D4H D5H 93-85

D5 D6C 84-69

D5B 85-77

D6D 97-77

D6H 95-85

D7F 74-69

D7G 93-77

D7H 93-85

D8K 82-74

D8L 92-82

D8N 93-86

D9H 82-74

D9L 86-80

D9N 93-86

WHEEL LOADERS 25SI

916 92-86

920 84-69

926E 93-87

930 85-69

936 87-83

936E 92-87

936F 96-92

950 81-69

950B 87-81

950E 91-87

950F 96-91

966C 83-68

966D 87-80

966E 90-87

966F 93-90

980 70-69

980B 84-70

980C 92-78

980F 93-91

988 76-69

988B 93-76

992 73-70

992B 79-73

992C 93-77

WHEEL SKIDDERS 25SI

508 89-87

518 93-71

528 93-75

530B 93-92

WHEEL TRACTOR DOZERS 25SI

814 81-69

814B 93-70

824B 79-70

824C 93-78

834 71-70

834B 93-75

CLARK

DOZER

280 380 80-79

280 380 78-75

380C 74-73

TRACTOR SHOVEL

125 77-73

125B 78-73

125C 80-79

275 74-71

675 72-70

85C 74-73

CONST EQUIP MISC TRUCKS

AFE-2 76-69

AFE-5 74-69

New 24 Volt 24V 25SI Alternator for Delco Industrial Applications

Technorati Tags: 25SI, Alternator, Applications, CLARK, Delco, H D, Industrial, N D, New, tool carriers, Tractor, Volt, Wheel, wheel loaders, wheel tractor

• Two Year Hassle Free Warrany!
• Expidited Shipping Available!
• Ships Within One Business Day!

Product Description

SCRAPER

613B 84-76

613C 93-84

615 87-81

615C 93-85

621 74-69

621B 623B 627B 86-73

621E 623E 627E 93-86

627 74-70

631C 633C 637 75-70

631D 85-73

631E 633E 651E 637E 657E 93-85

633D 637D 85-75

639D 84-79

641B 81-70

651B 657B 657B 84-70

660B 666B 78-70

TOOL CARRIERS 25SI

IT18B 92-86

IT28 86-84

IT28B 93-86

TRACK LOADER 25SI

941B 83-69

943 92-80

951C 81-71

953 92-81

955K 75-7

955L 81-71

963 93-81

973 93-82

977K 78-75

977L 82-72

983 79-69

983B 82-78

D10 86-78

D10N D11N 93-86

D3 78-72

D4D 79-69

D4E 86-80

D4H D5H 93-85

D5 D6C 84-69

D5B 85-77

D6D 97-77

D6H 95-85

D7F 74-69

D7G 93-77

D7H 93-85

D8K 82-74

D8L 92-82

D8N 93-86

D9H 82-74

D9L 86-80

D9N 93-86

WHEEL LOADERS 25SI

916 92-86

920 84-69

926E 93-87

930 85-69

936 87-83

936E 92-87

936F 96-92

950 81-69

950B 87-81

950E 91-87

950F 96-91

966C 83-68

966D 87-80

966E 90-87

966F 93-90

980 70-69

980B 84-70

980C 92-78

980F 93-91

988 76-69

988B 93-76

992 73-70

992B 79-73

992C 93-77

WHEEL SKIDDERS 25SI

508 89-87

518 93-71

528 93-75

530B 93-92

WHEEL TRACTOR DOZERS 25SI

814 81-69

814B 93-70

824B 79-70

824C 93-78

834 71-70

834B 93-75

CLARK

DOZER

280 380 80-79

280 380 78-75

380C 74-73

TRACTOR SHOVEL

125 77-73

125B 78-73

125C 80-79

275 74-71

675 72-70

85C 74-73

CONST EQUIP MISC TRUCKS

AFE-2 76-69

AFE-5 74-69

New 24 Volt 24V 25SI Alternator for Delco Industrial Applications

Technorati Tags: 25SI, Alternator, Applications, CLARK, Delco, H D, Industrial, N D, New, tool carriers, Tractor, Volt, Wheel, wheel loaders, wheel tractor