Track Loader

Archive for the ‘Info’ Category

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Caterpillar engine Cat C175-16

Technorati Tags: air fuel ratio, C17516, CAT, caterpillar, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

constructionequipmentzone.com Bulldozers Overview Video The biggest construction machinery site on the internet. Come visit us today.

Technorati Tags: blogs, Bulldozers, construction machinery, Overview, video

OK I’m thinking about getting a skid steer but I been wondering something. For all my jobs I have always rented a 4 wheel skid steer. Now my question is what reasons or what are the advantages to having a skid steer track loader instead of the 4 wheel loader?

I know the obvious is that it displaces it weight across a wider area but is it really worth it? Like yeah I been in situations where I needed to drive on soft sand and couldn’t but I always figured other ways of doing the job. So what do you guys think?

Technorati Tags: Skid, skid steer, soft sand, steer, track, Wheel, wheel loader

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Deutz engine TCD 2013

Technorati Tags: 2013, air fuel ratio, Chip, Chip Track, Deutz, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Caterpillar engine Cat C1.1

Technorati Tags: air fuel ratio, C1.1, CAT, caterpillar, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, loader, machine, performance, powered, track

• Improves engine horsepower by 15%
• Improves low-end and mid-range torque
• Increases fuel mileage by 6%
• Improves throttle response, acceleration throughout the RPM range
• ‘in-dash’ remote control included

Product Description
MAGNUMTUNING FACTORY EVO – Industrial Machine Performance Chip featuring remote control is a fully adjustable vehicle specific Industrial Machine performance chip also referred to as fuel controller designed to fuel injected gas/ common rail diesel engines. It tricks signals being read by the ECU, resulting an adjustment to the fuel curve, which is what causes the increase in HP, as well as improves acceleration and throttle response throughout the RPM range, simply wires inline with factory IAT (Intake Air Temperature) also referred to as MAF (Mass Air Flow) or MAP sensor and plugs into the exhaust oxygen or exhaust gas temperature (EGT) or exhaust gas oxygen (EGO) sensor harness whichever is applicable. Optimal torque, HP-boost, fully responsive engine & high fuel efficiency. Gain +50-200 additional HP (+15%) and have an aggressive engine. Combine the explosive performance with awesome fuel efficiency. This Industrial Machine performance chip will not affect engine’s or turbo’s reliability, durability. EVO-Tech performance chip tricks the ECU thinking the intake air much more cooler, then the ECU will send more fuel for a richer mix besides it controls the O2/EGO/EGT sensor(s) blocks restrictions applied by the ECU. Though performance chips are not especially for economy improvement & basically supposed to gain more HP, the module does improve MPG. When modifying air fuel ratio, slightly at the expense of emission & noise level, efficiency of combustion is improved & you SAVE FUEL. Typical economy improvement is 6%. Or even more. Even people who are not technical minded will find, kit is not difficult to install, just needs 60 minutes. Available to all gas & diesel, naturally aspirated & turbocharged engines controlled by engine management. Magnum Tuning has been dealing with manufacture of upgrades since 1994. Magnum’s experience warrants peak performance, reliability & perfect style. Magnum Parts are made in Europe & covered by 10-YEAR WARRANTY.

EVO-Tech Industrial Machine Performance Chip Track Loader powered by Perkins engine 1204E-E44TTA IOPU

Technorati Tags: 1204EE44TTA, air fuel ratio, Chip, Chip Track, engine, Europe, EVOTech, exhaust gas oxygen, exhaust gas temperature, fuel, Industrial, IOPU, loader, machine, performance, Perkins, powered, track

• New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed)
• Fits John Deere Skid Steer Loaders
• Fits John Deere Farm & Utility Tractors, Loaders
• Fits John Deere Track Loaders
• Please verify this is the right part number before ordering.

Product Description
JOHN DEERE Ag & Industrial

Loaders

2004 244J JD 2.4L 59HP Diesel
2004 304J JD 3.1L 73HP Diesel

Skid Steer Loaders

2007 313 JD 4024T 49HP Engine
2007 315 JD 4024T 49HP Engine

2000-2004 325 JD 5030T 70HP Engine

2005 328 JD 5030TW 76HP Engine
2005 332 JD 5030HW 85HP Engine

Track Loaders

CT315 JD 2.4L 49HP Diesel
CT322 JD 2.4L 66HP Diesel
CT332 JD 3.1L 82HP Diesel

Tractors – Farm

2008 5065M John Deere 3.0L 65HP Engine
2008 5075M John Deere 3.0L 75HP Engine
2008 5085M John Deere 4.5L 85HP Engine
2008 5095M John Deere 4.5L 95HP Engine
2008 5101EN John Deere 4.5L 101HP Engine
2008 5105M John Deere 4.5L 105HP Engine

5225 JD PowerTech 56HP Engine
5325 JD PowerTech 67HP Engine
5325N JD PowerTech 67HP Engine
5425 JD PowerTech 81HP Engine
5425N JD PowerTech 81HP Engine
5525 JD PowerTech 91HP Engine
5525N JD PowerTech 91HP Engine

Tractors – Utility

2004 4120 JD 4024T 43HP Dsl
2004 4320 JD 4024T 48HP Dsl
2004 4520 JD 4024T 60HP Dsl
2004 4720 JD 4024T 66HP Dsl

5065M JD PT 3.05L 65HP Dsl
5105M JD PT 4.5L 105HP Dsl
6100D JD PT 4.5L 98.9HP Dsl
6110D JD PT 4.5L 106HP Dsl
6115D JD PT 4.5L 118.4HP Dsl
6125D JD PT 4.5L 123HP Dsl
6130D JD PT 4.5L 129.8HP Dsl
6140D JD PT 4.5L 137.8HP Dsl

Replaces:

BOSCH
0-124-315-030

BOSCH NEWMAN
AL5057N

JOHN DEERE
RE509648, RE529377, SE501831

OEM(s): Bosch
Voltage: 12 Volts
Amps: 70 Amps
Regulator Position: 1:00
Polarity: Negative
Output Stud Dimensions: M8-1.25
Reg. Location: Internal
Fan Location: Internal
Approximate Weight: 13 lbs / 5.91 kg

This is a Brand New Alternator for John Deere Farm & Utility Tractors, Loaders, Track Loaders, Skid Steer Loaders

Technorati Tags: Alternator, brand, Brand New, Deere, diesel tractors, Dsl, engine, Fan Location, Farm, J JD, John, LOADERS, M John, N JD, Reg, Skid, skid steer loaders, steer, this, track, track loaders, Tractors, Utility

• 12 Volts, 90 Amps
• Regulator Position 10:00
• Output stud dimensions M8-1.25
• One year, hassle free warranty!
• Ships within one business day!

Product Description
Bobcat
6675292, 6678205

Mando
66785292, TA000A48402

Valeo
A12390N, TA000A48401

Applications

BOBCAT

COMPACT TRACK LOADER

T200 Deutz BF4M1011F Dsl 1999

SKID STEER LOADER

S185 Kubota V2203TEB Dsl 2002-2003
S250 Kubota V3300DI Turbo Dsl 2002-2003

Alternator Bobcat T200 S185 S250 Track Loader, Skid Steer A12390N

Technorati Tags: A12390N, Alternator, bobcat, compact track loader, free warranty, loader, Mando, S185, S250, Skid, skid steer loader, steer, T200, track

allcatequipment.com Increase Your Production And Cut Your Operating Cost by 30% Electronic Control Increase Ease of Use Providing Greater Efficiency Returning Bigger Impact to The Bottom Line 148 Horse Power 2.42 Yard Bucket with 8 Teeth Like New 36000 Lbs 1220 Hours 95% Under Carriage Enclosed Cab A A/MF/M CD Player We Will Accept Trades on This Machine. Or Sell it to us Right Now… For ~ Cash ~

Technorati Tags: 955L, A, allcatequipment, CAT, Clean, com, electronic control, EROPS, horse power, L Track, loader, M CD, Production, Real, track

Product Description
This digital document is an article from Underground Construction, published by Oildom Publishing Company of Texas, Inc. on July 1, 2011. The length of the article is 467 words. The page length shown above is based on a typical 300-word page. The article is delivered in HTML format and is available immediately after purchase. You can view it with any web browser.

Citation Details
Title: New Holland Construction launches three new compact track loaders.(NEWproducts)
Author: Unavailable
Publication: Underground Construction (Magazine/Journal)
Date: July 1, 2011
Publisher: Oildom Publishing Company of Texas, Inc.
Volume: 66 Issue: 7 Page: 58(1)

Distributed by Gale, a part of Cengage Learning

New Holland Construction launches three new compact track loaders.: An article from: Underground Construction

Technorati Tags: article, Compact, Construction, from, Holland, launches, LOADERS, three, track, Underground